Hi guys, I’m having trouble getting a perfectly sealed bag, I’ve tried everything-
Double bagging
Envelope bagging
Spraying some tacky glue on the bag
Making sure I have a clean surface and work space
Checked my catch pot and hoses for leaks

I just can’t get a perfect seal! It leaks around 2hg an hour, it’s a very small / slow leak!

Has anyone tried ultrasonic leak detectors to find tiny leaks ?

I infused the part with the very slow leak (see pic) pic was taken 1h after the full infusion. Are the light areas caused by a vac leak

Thanks

I use the Amprobe ULD300. Its the biggest time and money saver there is.

With this model all youll hear is static. When the static amplifies you know youre getting closer to your leak.



Jason

Thanks does it detect pin hole leaks?

Yes sir. It will pick up leaks you will not be able to hear. It’s most effective on the edges of the bag. If there is a pin hole somewhere on the body of the bag its a little harder to find but will still work.

Jason

In my opinion a digital pressure sensor is the best tool for tight bags. As I am using pa/pe/pa bag, I never have any problems with a punctured bag. So I connect the pump to the vacuum hose, and the pressure sensor to the feed hose. This tells me immediately if my bag is tight, and if it isn't, I'll work my way around the sealing edge while looking at the manometer. The pressure changes if I am at a leaking point. So I know where to invest some extra work. This saves time and is very reliable. And you can skip the drop test, wich saves even more time.