XC110 properties

Talk Composites - The Forum for Advanced Composites

Back

Home
»
Easy Composites Ltd Technical Support
»
Easy Composites Ltd - Product Specific Pages
»
Pre-Preg Carbon Fibre
»
XC110 properties

XC110 properties

XC110 properties

Author	Message
cbk	c cbk posted 6 Years Ago HOT Topic Details
c Group: Forum Members Posts: 2, Visits: 22	What is the fibre volume fraction of XC110 prepreg?
	Reply Like 7

GO

Merge into selected topic...

Merge into merge target...

Merge into a specific topic ID...

Threaded View

Threaded View

XC110 properties

cbk - 6 Years Ago

Hi cbk, The 210 is 42% and the 416g is 38%.

Rich (Staff) - 6 Years Ago

Okay thank you so much! Also is there any measured data on the CTE and cure shrinkage values (for the 210g)?

cbk - 6 Years Ago

There are no measured values for that data as yet, however in our experience in practice the shrinkage has been negligible and not easily measurable on the scale of parts made under testing.

Warren (Staff) - 6 Years Ago

Hi there, What type of carbon fiber and resin system are used in XC110? Would it be possible to also provide properties of the resin system? like the cure time required at different curing...

Hui Shan - 6 Years Ago

The fibre type and recommended cure cycle profiles are on the Technical Data Sheet

Warren (Staff) - 6 Years Ago

Okay thanks, might have missed it previously Also, it was listed in the Data Sheet that the cure temperature range is from 85 to 120. Would it be possible to have a single stage instead of a two...

Hui Shan - 6 Years Ago

Follow the Low Temp Cycle in the XC110 processing guide as that has a maximum cure temperature of 85C which is within your limits. However it is not a single stage process.

Warren (Staff) - 6 Years Ago

Similar Topics

Post Quoted Reply

Reading This Topic

Login
Remember Me Reset Password Resend Validation Email Login	Facebook Google

Explore

Messages

Mentions

Search