Group: Forum Members
Posts: 1,
Visits: 3
|
Hello, I would like advice on the best resin (or mix) to use when skinning balsa wings etc with very light glass cloth (around 20g/m2) or carbon tissue which is even lighter and thinner. I have not done this for a while and I used to find that the thinner the resin, the better. In many cases, it would only flow well after heating (in a very uncontrolled manner) Would it be suitable to use an infusion resin? I do not mind if I have to use more than one coat, maybe even use different resins for each coat?
Any advice would be greatly appreciated.
Thanks Simon Clark
|