VIP or 2 part mould

Author	Message
al010964	al010964 posted 13 Years Ago HOT Topic Details
Group: Forum Members Posts: 5, Visits: 75	Hi, I have been trying to build some small composite parts using either f.glass and or carbon 2/2 twill or a combination of both. The basic part is approx. 3" long and has a deep 0.6" cavity about 0.3" wide in the shape of a Doug out canoe. I have tried to a vaccuum bag setup pulling 20" inches but was getting voids and bridging... Etc. Having just watched the videos should I try VIP and get a pump that can pull 29-30 inches or continue down my current path which is Making a mould (female/male). I am getting close to getting it right, but it has taken several goes with a cnc machine. Next question is do you have a product that can be used like gel coat on small parts to get a good finish, currently using 3/4 fglass as the first layer but still get some pin holes. Just don't want to go to all the effort to setup a dump gun for a 3" part. Thanks in advance, Adrian Australia
	Reply Like 3

Merge into selected topic...

Merge into merge target...

Merge into a specific topic ID...

VIP or 2 part mould

al010964 - 13 Years Ago

neilb - 13 Years Ago

al010964 - 13 Years Ago

[quote][b]al010964 (18/10/2012)[/b][hr] How is sunny Melbourne ? I am in Darwin. its nice...

neilb - 13 Years Ago

baja_patient - 13 Years Ago

Matt (Staff) - 13 Years Ago

al010964 - 13 Years Ago

baja_patient - 13 Years Ago

Something like this? http://www.carboncopyuk.com/acatalog/info_267.html

FLD - 13 Years Ago

al010964 - 13 Years Ago

Login
Remember Me Reset Password Resend Validation Email Login	Facebook Google