Hi E.C. Team, 
(Question probably for Miss. Stacie or anyone that can assist)

I am having an issue with the write function on the CN7-B program freezing.
I know that if the ."Set Value" is set lower than the min oper. temp of 10C,then it will error out (freeze per user manual). So I went ahead and changed all to 20C min to be safe.
I also made sure that the first step started with 20C at 1 min so the CN7-B/PID can calculate the amount of time needed to get to the next step for Ramp prior to soak.  
The lights are blinking on the USB port also so I know its trying to do something. 
All patterns are set to standard patterns for EMP160/EG160/XT135/XC110.

Based on my patterns can you guys see anything wrong? I have tested multiple patterns just to see if it would write.

Side question, what is considered an overloaded oven? 

Any help would be awesome! 
Thanks again guys! 
Mike