Hello, I recently started the infusion of resin with carbon fabrics and I have some doubts.
1 when we apply the release wax or any release agent to the mold, I imagine that it is necessary to avoid in the area where the perimeter putty has a release agent or there is no problem.
2 Another question is at what temperature is it advisable to work in an infusion.
3 if we use core fabrics etc, there is some way to avoid marking these fibers on the visible side, if you want a cosmetic laminate, or usually there is no problem, I have doubts if it is advisable to use transparent gel coat or you can do without gel coat.
4 at what pressure it is advisable to work the carbon at maximum pressure or there is an optimal pressure for this task.
Thank you very much in advance,