Danish member


Danish member
View
Options
Author
Message
WindingMX
W
WindingMX
posted 8 Years Ago HOT
Junior Member (24 reputation)Junior Member (24 reputation)Junior Member (24 reputation)Junior Member (24 reputation)Junior Member (24 reputation)Junior Member (24 reputation)Junior Member (24 reputation)Junior Member (24 reputation)Junior Member (24 reputation)
Group: Forum Members
Posts: 4, Visits: 26
Hi fellow members

Greatings from Denmark

My interest is carbonparts for motorsports

Thanks for having onboard :-)

Cheers
Kasper Winding
Reply Like 2
GO

Merge Selected

Merge into selected topic...



Merge into merge target...



Merge into a specific topic ID...



Submit

Threaded View
Threaded View
Danish member
WindingMX - 8 Years Ago
     Hi! Welcome to the forum .. from another Danish member :-) I live just north of Aarhus, and work mostly on CF parts for motorbikes. (Specials, one-offs, some skinning) I use mostly infusion and som...
Dravis - 8 Years Ago
             Hejsa :-) Thats perfect, thinking about starting with carbon infusion but also considering trying prepreg. My plan is to buy the easy composites oven. Dravis, do you use a carbon/kevlar combo for...
WindingMX - 8 Years Ago
     Hi Kasper! Yes I have used several combinations of fabric, both pure Carbon , pure kevlar and mixed fibres. I normally plan ahead when it comes to fasteners in the parts, and infuse them in place,...
Dravis - 8 Years Ago
     Welcome to the forum!! A mix of carbon kevlar can be a good combination on these bike parts as it adds to abrasion resistance but still has some stiffness.
Warren (Staff) - 8 Years Ago
             Hi Warren Yeah a mix best i think. But we will do a RL test between the different blends on one of our mx bikes. (Carbon only, kevlar only and a mix).Was thinking about making some high-grade alu...
WindingMX - 8 Years Ago
             Hi Any chance that you could sent me a link to the carbon/kevlar product you would use for our mx parts? Should it be carbon/kevlar twilled layers or layers of seperat carbon and kevlar. ? Cheers...
WindingMX - 8 Years Ago
     Hi, from one more danish member. I live nearby copenhagen. I have found many good hints in this forum. during my ongoing kayak building project. Right now I am looking for an article by Dravis, wher...
Almand - 8 Years Ago
     Hi Almand, I do not think I have written about the PVA release coating, since I do not use it at all. But, I may have commented on it in some thread.
Dravis - 8 Years Ago
             Hi Dravis, Thank for replik anywayBest retarderede Keld
Almand - 8 Years Ago

Similar Topics

Post Quoted Reply
Reading This Topic

Powered by InstantForum 2017-0 Final © 2025
Execution: 0.000. 2 queries. Compression Enabled.
Explore
Messages
Mentions
Search