Skinning amine blush

Author	Message
thanasiss3	thanasiss3 posted 10 Years Ago HOT Topic Details
Group: Forum Members Posts: 18, Visits: 348	Hi everyone,i skin parts for automotive interiors with cf using the ec high temp epoxy resin,after the wrapping i wet the fabric with epoxy,after 24hours i sand with 120grit and after that add 2 layers of epoxy when the first is at tack free stage. After that i put the parts in an oven and ramp the temp at 100celcius,after that i have too much amine blush,it can stick to my hand,is this normal? Is there any chance the epoxy to keep blushing under the 2k clearcoat and give me a yellowish pary? I must wait more time to cure after the complete cycle at the oven?
	Reply Like 3

Merge into selected topic...

Merge into merge target...

Merge into a specific topic ID...

thanasiss3 - 10 Years Ago

Dravis - 10 Years Ago

thanasiss3 - 10 Years Ago

Warren (Staff) - 10 Years Ago

VVS - 10 Years Ago

thanasiss3 - 10 Years Ago

Login
Remember Me Reset Password Resend Validation Email Login	Facebook Google