Hi all,
the aim of this work is to obtain a light, confortable and cool kiteboard 
Instead of use an usual PU or  wood core I tryed to generate something similar to honeycomb.
At first it needs a lot of meters of carbon's tube.. so you have a roll a lot..
For the top and bottom sheet I chose the carbonkevlar for its elongations properties.

I show you some picture and a quick video with the building process.

For the video:  https://www.youtube.com/watch?v=XEiZ1XdNf-c

Some photo

















Bye





My You Tube Channel

Beautiful job !

What did you use for the rails / edges ?

I used epoxy resin charged with milled carbon fiber

On the bow and tail it seems you used filler

No, there are two small pieces of balsa wood. When laminated they given to the tails a right amount of rigidity.







My You Tube Channel

Thanks ! 

Looks awesome!

The core must have taken hours to get perfectly right!

Warren Penalver
Easy Composites / Carbon Mods - Technical Support Assistant

Thanks, for sure isn't a quik work, you must believe in it





My You Tube Channel

At first I didn't realize what the core was! That's gotta be the coolest use for carbon fiber tube I have seen so far.  So nasty!