My winter Project GSXR ART

Talk Composites - The Forum for Advanced Composites

Back

Home
»
Advanced Composites Forum
»
Projects
»
Motorsport, Vehicle Design and Modification
»
My winter Project GSXR ART

My winter Project GSXR ART

Author	Message
Jonas	Jonas posted 11 Years Ago HOT Post Details
Group: Forum Members Posts: 16, Visits: 120	Whoaaaaa. I didn't think of that! I am intrigued, but once again, Chem 151 ruins everything...
	Reply Like 3
wozza	wozza posted 11 Years Ago HOT Post Details
Group: Forum Members Posts: 688, Visits: 5.4K	Wheel speed sensors for the traction control etc?????? Carbon Copies Ltd
	Reply Like 3
Jonas	Jonas posted 11 Years Ago HOT Post Details
Group: Forum Members Posts: 16, Visits: 120	What's with the notches on the rear brake disk? Looks like they're on one of the front ones too?
	Reply Like 3
thorstengsxr	thorstengsxr posted 11 Years Ago HOT Post Details
Group: Forum Members Posts: 16, Visits: 1.1K	Hi I use infusion for this. But it is not m first project the other look like a standart gsxr this is from my first mold and the mold was realy bad the sceound one was much better regards Thorsten Edited 11 Years Ago by thorstengsxr
	Reply Like 4
Shaneer22	Shaneer22 posted 11 Years Ago HOT Post Details
Group: Forum Members Posts: 156, Visits: 14K	Thorsten are you making the monocoque using wet lay up or infusion.best regards.
	Reply Like 11
thorstengsxr	thorstengsxr posted 11 Years Ago HOT Post Details
Group: Forum Members Posts: 16, Visits: 1.1K	Hi you need the M800 for 8 injectors, The ECU was standart in SSP WM since 2012. DBW, Tranctioncontrol, Lanchecontrol, Whellycontrol, Elektronic Motorbreack system, blipper for downshift and so on. regards Thorsten Edited 11 Years Ago by thorstengsxr
	Reply Like 3
Hanaldo	Hanaldo posted 11 Years Ago HOT Post Details
Group: Forum Members Posts: 2.5K, Visits: 28K	Serious ECU for a bike. What's done to it?
	Reply Like 3
thorstengsxr	thorstengsxr posted 11 Years Ago HOT Post Details
Group: Forum Members Posts: 16, Visits: 1.1K	Hi Sahneer Yes it is a self supporting monocoque. The fuel can be original or my small aramid tank (10L) with tankcover. But the position of the tank are the same. The box under the seat is for the M800 and the PDM. But in future the prosition of the electronic and the fuel can be change. regrads Thorsten
	Reply Like 3
Shaneer22	Shaneer22 posted 11 Years Ago HOT Post Details
Group: Forum Members Posts: 156, Visits: 14K	Looking at pics,looks like self supporting monocoque,will the fuel tank be relocated.and will it be made from composites.regards.
	Reply Like 4
thorstengsxr	thorstengsxr posted 11 Years Ago HOT Post Details
Group: Forum Members Posts: 16, Visits: 1.1K	Hi the Akra is something special! some of the parts are from Suzuki GSXR and ohters a such as the can comes from a Kalex Moto2 Bike regards Thorsten
	Reply Like 4