My winter Project GSXR ART

Talk Composites - The Forum for Advanced Composites

Back

Home
»
Advanced Composites Forum
»
Projects
»
Motorsport, Vehicle Design and Modification
»
My winter Project GSXR ART

My winter Project GSXR ART

Author	Message
thorstengsxr	thorstengsxr posted 10 Years Ago Topic Details
Group: Forum Members Posts: 16, Visits: 1.1K	Hi Guys Hier is my project for this yaer. Mould is finish and know i bild the pattern. regards and bst wishes fro0m germany Thorsten
	Reply Like 1
Shaneer22	Shaneer22 posted 10 Years Ago Post Details
Group: Forum Members Posts: 156, Visits: 14K	I like the aesthetics,very nice ,I have just bought a rsv mille which I hope to change,not the best bike to performe surgery but a challenge for sure.
	Reply Like 1
Jonas	Jonas posted 10 Years Ago Post Details
Group: Forum Members Posts: 16, Visits: 120	Are you just running an akra can or full exhaust?
	Reply Like 1
thorstengsxr	thorstengsxr posted 10 Years Ago Post Details
Group: Forum Members Posts: 16, Visits: 1.1K	Hi the Akra is something special! some of the parts are from Suzuki GSXR and ohters a such as the can comes from a Kalex Moto2 Bike regards Thorsten
	Reply Like 1
Shaneer22	Shaneer22 posted 10 Years Ago Post Details
Group: Forum Members Posts: 156, Visits: 14K	Looking at pics,looks like self supporting monocoque,will the fuel tank be relocated.and will it be made from composites.regards.
	Reply Like 1
thorstengsxr	thorstengsxr posted 10 Years Ago Post Details
Group: Forum Members Posts: 16, Visits: 1.1K	Hi Sahneer Yes it is a self supporting monocoque. The fuel can be original or my small aramid tank (10L) with tankcover. But the position of the tank are the same. The box under the seat is for the M800 and the PDM. But in future the prosition of the electronic and the fuel can be change. regrads Thorsten
	Reply Like 1
Hanaldo	Hanaldo posted 10 Years Ago Post Details
Group: Forum Members Posts: 2.5K, Visits: 28K	Serious ECU for a bike. What's done to it?
	Reply Like 1
thorstengsxr	thorstengsxr posted 10 Years Ago Post Details
Group: Forum Members Posts: 16, Visits: 1.1K	Hi you need the M800 for 8 injectors, The ECU was standart in SSP WM since 2012. DBW, Tranctioncontrol, Lanchecontrol, Whellycontrol, Elektronic Motorbreack system, blipper for downshift and so on. regards Thorsten Edited 10 Years Ago by thorstengsxr
	Reply Like 1
Shaneer22	Shaneer22 posted 10 Years Ago Post Details
Group: Forum Members Posts: 156, Visits: 14K	Thorsten are you making the monocoque using wet lay up or infusion.best regards.
	Reply Like 1
thorstengsxr	thorstengsxr posted 10 Years Ago Post Details
Group: Forum Members Posts: 16, Visits: 1.1K	Hi I use infusion for this. But it is not m first project the other look like a standart gsxr this is from my first mold and the mold was realy bad the sceound one was much better regards Thorsten Edited 10 Years Ago by thorstengsxr
	Reply Like 1