few pattern making questions

Author	Message
Bonobo	Bonobo posted 10 Years Ago Topic Details
Group: Forum Members Posts: 85, Visits: 1.2K	Hi, I'm making a pattern for a boot spoiler, the way i was going to do it was to laser cut profile templates from 3mm hardboard (see attachment), space them at 50mm intervals on the boot lid, fill the gaps with pattern making low density PU foam blocks hot melt glued into the gaps. next sand down to the profiles, skim with filler, pattern coat etc. can anyone see any reason why this wouldn't work ok? Attachments IMG_2608.jpg (530 views, 1.00 MB)
	Reply Like 1
Hanaldo	Hanaldo posted 10 Years Ago HOT Post Details
Group: Forum Members Posts: 2.5K, Visits: 28K	That will work absolutely fine mate, that's almost exactly how I built mine
	Reply Like 2
Bonobo	Bonobo posted 10 Years Ago HOT Post Details
Group: Forum Members Posts: 85, Visits: 1.2K	It worked out quite well, Here's the plug in pattern coat primer
	Reply Like 2