spray adhesive

Talk Composites - The Forum for Advanced Composites

Back

spray adhesive

Author	Message
nickvancamp1	nickvancamp1 posted 11 Years Ago HOT Topic Details
Group: Forum Members Posts: 10, Visits: 104	another question regarding the spray adhesive. i can't find in on the composites webshop, and i'm sure i'm gonna need it making a car bonnet an stuff with the infusion technique. where can i find or car you make it yourself with an empty spray bottle and some infusion resin? i was thinking about spray glue but this will react with the epoxy i suppose?
	Reply Like 3
Fasta	Fasta posted 11 Years Ago HOT Post Details
Group: Forum Members Posts: 468, Visits: 3.5K	Look for 3M super 77. Fastacraft Facebook page
	Reply Like 2
ajb100	ajb100 posted 11 Years Ago HOT Post Details
Group: Forum Members Posts: 346, Visits: 4.4K	I couldn't get on with the 3m stuff, now use cytec aerofix and it stays tacky for ages. Almost too long as I use it when cutting off the role to stop fraying and sometimes it sticks to itself when rolled back up
	Reply Like 2
combustioncraig	combustioncraig posted 11 Years Ago HOT Post Details
Group: Forum Members Posts: 26, Visits: 46	like Fasta said 3M super 77
	Reply Like 3
nickvancamp1	nickvancamp1 posted 11 Years Ago HOT Post Details
Group: Forum Members Posts: 10, Visits: 104	leaves no markes or spots in the gelcoat?
	Reply Like 3
Hanaldo	Hanaldo posted 11 Years Ago HOT Post Details
Group: Forum Members Posts: 2.5K, Visits: 28K	You need to use it extremely sparingly. Like a mist so fine you can't even see it on the part, it will still stick. Takes a bit of practice because the 3M Super 77 likes to come jetting out of the can. When you get the hang of it you can use it without any blemishes on the surface finish.
	Reply Like 2
nickvancamp1	nickvancamp1 posted 11 Years Ago HOT Post Details
Group: Forum Members Posts: 10, Visits: 104	Ok, thats all i needed to know. Thx for the help guys
	Reply Like 3