Complex moulds, graphics, storage temperatures and serial moulds.

Talk Composites - The Forum for Advanced Composites

Back

Complex moulds, graphics, storage temperatures and serial moulds.

Author	Message
Zekewarg	Zekewarg posted 12 Years Ago HOT Topic Details
Group: Forum Members Posts: 42, Visits: 241	Q1: How would I go about making spherical objects? Such as a helmet (for show), round lampshade etc? Is there a way to make positive mould for that without getting creases and folds? (I think positive is laying the outer layer first, right?) Q2: I want to add a graphic in the form of a sticker inside the outer layer of epoxy, both in wet lay and infusion, how would I go about this? For infusion, could i mount the sticker directly to the first layer or would that interfere with the epoxy distribution? For wet lay, I should be able to put the sticker face down into the first coat of epoxy in the mould right? Q3: In what temperatures can I store the supplies? Cloth, releaseagents, epoxy and everything else? Could I have it outside in the garage which can reach -15 C? I will of course heat everything before casting. Q4: Would it be possible to use serial coupled moulds for infusion? For ex; a mould for a longboard with a hose from the opposite side of the epoxy container leading into the next mould? Would the pump be able to pull the epoxy all the way? Any other reasons it might not work? You guys must be really tired of my questions by now. Sorry....
	Reply Like 2
Reply
Carbon Tuner	Carbon Tuner posted 12 Years Ago HOT Post Details
Group: Forum Members Posts: 104, Visits: 422	to me the hardest part is getting a good seal, I would hate to have 5 moulds linked together and try and find a leak. If Brute Force Isn''''t working your not using enough...
	Reply Like 2

Merge into selected topic...

Merge into merge target...

Merge into a specific topic ID...

Threaded View

Complex moulds, graphics, storage temperatures and serial moulds.

Zekewarg - 12 Years Ago

Hi Zakewarg, I'm sure others will have some input to but here's a few pointers for you......

Matt (Staff) - 12 Years Ago

Q1: Thanks! A split mould it is. But does the cloth have enough stretch and give to form a smooth...

Zekewarg - 12 Years Ago

[quote][b]Zekewarg (26/01/2012)[/b][hr] Q1: Thanks! A split mould it is. But does the cloth have...

Joe - 12 Years Ago

To add with reference to stickers, try a bit of your resin on a spare scrap sticker as sometimes the...

Warren - 12 Years Ago

to me the hardest part is getting a good seal, I would hate to have 5 moulds linked together and try...

Carbon Tuner - 12 Years Ago

Reading This Topic

Login
Remember Me Reset Password Resend Validation Email Login	Facebook Google

Complex moulds, graphics, storage temperatures and serial moulds.

Complex moulds, graphics, storage temperatures and serial moulds.

Merge Selected

Threaded View

Similar Topics

Reading This Topic

Login

Explore

Messages

Mentions

Search