+x Joel Illerhag - 9/3/2018 4:47:10 PM+x KOSTAS - 9/3/2018 4:42:22 PMHa that's almost what i wanted to achieve .So cool to find someone else who had the same idea . I think you have a tevo printer ...nice tool .What filament did you use for your core prints?. I printed mine in HIPS in order to dissolve afterwards worked pretty fair . Your final result is awesome .nice job !!! I think 3d printing has a lot of potential on this field ! Cheers from Greece I used carbon filament that is a mixture of 90 % PLA and 10% carbon.I would like to know how you dissolved the 3D printed parts after wrapping.Did you use some kind of acid to dissolve the 3d print from the carbonfiber parts?Cheers from Denmark.
+x KOSTAS - 9/3/2018 4:42:22 PMHa that's almost what i wanted to achieve .So cool to find someone else who had the same idea . I think you have a tevo printer ...nice tool .What filament did you use for your core prints?. I printed mine in HIPS in order to dissolve afterwards worked pretty fair . Your final result is awesome .nice job !!! I think 3d printing has a lot of potential on this field ! Cheers from Greece