This is the new Cold Casting using Metal Powders video from our casting series. In this video we demonstrate how to use metal powder with the resin casting starter kit to produce metallic effect pieces. The guide takes you through the entire process including creating the silicone moulds, casting a splash part and finally casting and finishing the cold cast part.

The metal powder not only gives amazing metallic effects, it also makes the pieces weighty and the feels cool to the touch like a true metal piece. It is very easy to work with and with quite simple finishing work it produces brilliant results, and coupled with the Xencast® P2 Fast Cast resin means that multiple pieces can be produced in a very short time as the curing time is under 30 minutes per casting.

The finishing process was achieved by using abrasive papers and a sanding block and then given a contrast effect using black spray paint and steel wool. Different looks can be achieved by using different metals - aluminium, bronze, brass or copper are readily available.

Here's the video tutorial demonstrating how to cold cast using metal powders:


If anyone has any questions on this process or the materials please post them and we'll be happy to answer them.

Becky Hinton
Easy Composites

Hi Dinoman,

What type of gelcoat do you have on the mould tool as you need to ensure you have a compatible type and of course use a suitable release agent? You should be able to apply the casting material in such a way that you have a very good finish on the reverse anyway so as to avoid flash lines.