Pattern Making Tutorial

Talk Composites - The Forum for Advanced Composites

Back

Pattern Making Tutorial

Pattern Making Tutorial

Author	Message
cvasilliou	c cvasilliou posted 7 Years Ago HOT Topic Details
c Group: Forum Members Posts: 16, Visits: 102	https://www.youtube.com/watch?v=XeeSsmsm9h0 lets say im making a mold exactly like this tutorial shows,but i want to make a pattern out from this mold with vacuum infusion.should i do anything different?the ionly thing im imagining to do is applying extra layers of coopling coat and some layers of chopped strand mat.have i thought it right?
	Reply Like 4

GO

Merge into selected topic...

Merge into merge target...

Merge into a specific topic ID...

Threaded View

Threaded View

Pattern Making Tutorial

cvasilliou - 7 Years Ago

Do you mean for the mould? The actual layup of the mould can be exactly the same as the video shows, no need to change anything. Youwill probably need to bag it in the same fashion as well, so you...

Hanaldo - 7 Years Ago

you said it will only work for one.you mean i wouldnt be able to use again this mould for making another part?

cvasilliou - 7 Years Ago

You would, but the mould would likely need a bit of clean up. The resin that will make its way onto the back of the mould will be extremely sharp and will cut any future bags to shreds, so you would....

Hanaldo - 7 Years Ago

I have got a mould just like that (an airbox, 3 piece mould), and I made several parts with resin infusion. I didn't bag the whole mould, just the inside, like it was a one piece mould. The split...

oekmont - 7 Years Ago

Just to expand on Oekmont's post with some photos, this is how you might go about that technique: Layup the first half of the mould as normal, then when you do the next piece and remove the temporar...

Hanaldo - 7 Years Ago

Similar Topics

Post Quoted Reply

Reading This Topic

Login
Remember Me Reset Password Resend Validation Email Login	Facebook Google

Explore

Messages

Mentions

Search