I have a DVP EC.20 Industrial Vacuum Pump ‘ What power cord for US?
Description says pump will not run on 110v, another forum topic says it will run on 110v or 220v and also says that it takes a standard computer lead, but all standard computer leads for US is 110v. Will standard 110v US computer lead work? Or what power lead do I need for US? There no pictures so it is hard to understand. Thank You...

The EC.20 Industrial Composites Vacuum Pump is suitable for use in all countries and territories with a 220-240v mains supply. The pump is available with a choice of the most popular international mains plug types. It is based on the same plug as a "computer" or kettle power supply lead. 

This pump cannot be operated on a 110v mains supply such as in the USA or Japan.  You would need to get an electrical engineer to wire you in a 220V supply from your existing 110V which in most cases is possible to do.


Warren Penalver
Easy Composites / Carbon Mods - Technical Support Assistant

I have already ordered a cord for computer, it is a heavy duty 110v cord, could I use that if put a 220V plug in on it?

Chances are it would be fine, but check with the manufacturer to be on the safe side.


Warren Penalver
Easy Composites / Carbon Mods - Technical Support Assistant