vinyl rapping carbon.

Author	Message
*VVS*	*VVS* posted 9 Years Ago HOT Topic Details
Group: Moderators Posts: 226, Visits: 334	Any body got any info on wrapping carbon. I'm making parts for a bike that's sponsored and the sponsor wants to vinyl rap the bike in their livery, any special requirements before they start. Edited 9 Years Ago by VVS
	Reply Like 3
Hanaldo	Hanaldo posted 9 Years Ago HOT Post Details
Group: Forum Members Posts: 2.5K, Visits: 28K	Shouldn't be any different to wrapping any other substrate. Needs to be very clean, etc. All stuff they should be doing anyway. If the part came out of a mould that used a wax release agent, or you don't know for sure what type of release agent was used, then its a good idea to give it a really good solvent clean, then a cut and polish, and then another really good solvent clean. Just to get rid of any traces of release agent - wax is a pain for product transfer. Semi-perms shouldn't transfer at all, so should be fine in that case.
	Reply Like 3
*VVS*	*VVS* posted 9 Years Ago HOT Post Details
Group: Moderators Posts: 226, Visits: 334	I used semi perm so I will just give the parts a good soap down and let the wrapper do the rest. They doing me a favour wrapping as initially it was going to be painted so now I'm not worried about any tiny pinholes that would have needed filling.
	Reply Like 3