For Pattern-Coat™ Primer through the Gel coat cup gun, thin down using 25% acetone to get a good even spray characteristic.

For Pattern-Coat™ Hi-Gloss, when spraying, thin the Pattern-Coat™ Hi Gloss using pure acetone at a ratio of 25%.

1. Start by spraying a 'mist coat' over the pattern. Wait 2-5 minutes for the solvents to evaporate.
2. Pattern-Coat™ Hi-Gloss can be applied wet-on-wet but sufficient time must be left between passes (2-5 minutes) to allow time for the solvent to evaporate. Around 5 passes should leave a sufficient thickness of Hi-Gloss to ensure the surface can be properly flatted.

Warren Penalver
Easy Composites / Carbon Mods - Technical Support Assistant