National Composites Show NEC 4/5th Nov

Talk Composites - The Forum for Advanced Composites

Back

National Composites Show NEC 4/5th Nov

Author	Message
ChrisR	ChrisR posted 10 Years Ago HOT Topic Details
Group: Forum Members Posts: 363, Visits: 3K	Who's going this year? I'm aiming for Wednesday 4th at the moment. Chris
	Reply Like 3
Replies
prsw	prsw posted 10 Years Ago HOT Post Details
Group: Forum Members Posts: 112, Visits: 1K	morepower (03/11/2015) Going there on Thursday. I am going to see a few suppliers about consumables and some tooling resins. As I was an engineer in my old job I am just as interested in the engineering side of the show so its always quite interesting for me. If I known about this a bit earlier I could have come, crap. But I trust you find out the same I would have, enjoy and lets talk later on. /Petter http://motoform.blogspot.se
	Reply Like 3
morepower	morepower posted 10 Years Ago HOT Post Details
Group: Forum Members Posts: 242, Visits: 1.2K	prsw (03/11/2015) morepower (03/11/2015) Going there on Thursday. I am going to see a few suppliers about consumables and some tooling resins. As I was an engineer in my old job I am just as interested in the engineering side of the show so its always quite interesting for me. If I known about this a bit earlier I could have come, crap. But I trust you find out the same I would have, enjoy and lets talk later on. /Petter No problem. If I see anything you may be interested in I will let you know.. Next year.. Come and stop with us then we can have a good chat...
	Reply Like 3

Merge into selected topic...

Merge into merge target...

Merge into a specific topic ID...

Threaded View

National Composites Show NEC 4/5th Nov

ChrisR - 10 Years Ago

Never been to a Composite Conference before mmm been to plenty of Computing Conferences at the NEC...

davro - 10 Years Ago

If work permits I might try and go as I havent been to it in a few years with working out in...

scottracing - 10 Years Ago

I found last years show to be very much lacking from previous years. I'm certainly contemplating not...

TCS - 10 Years Ago

Ah, I missed last years so didnt realize it had gone down a touch. Still, I'm going anyway as I use...

ChrisR - 10 Years Ago

Be interesting to hear your views of this years show Chris. Due to work commitments there's no...

TCS - 10 Years Ago

Going there on Thursday. I am going to see a few suppliers about consumables and some tooling...

morepower - 10 Years Ago

[quote][b]morepower (03/11/2015)[/b][hr]Going there on Thursday. I am going to see a few suppliers...

prsw - 10 Years Ago

[quote][b]prsw (03/11/2015)[/b][hr][quote][b]morepower (03/11/2015)[/b][hr]Going there on Thursday....

morepower - 10 Years Ago

Plan to be at the show on Thursday. Chris

carbonfibreworks - 10 Years Ago

im now going, as ive got a couple of suppliers I need to speak too. Theres a couple of interesting...

scottracing - 10 Years Ago

Went yesterday, I really enjoyed it. The level of tech has certainly leaped forwards from two years...

ChrisR - 10 Years Ago

Same here.. I spoke to a few resin suppliers and got given some great advice and the Chem lease guys...

morepower - 10 Years Ago

it wasnt too bad a show, made a few new contacts and had a good chat with some tooling suppliers and...

scottracing - 10 Years Ago

Who did you talk to about pre-pregs?

morepower - 10 Years Ago

shd and prf as i wanted to know minimum order quantities, wanted to speak to deltapreg but ran out...

scottracing - 10 Years Ago

I would not use the PRF stuff for surface carbon. Stick with SHD for that... You will not be...

morepower - 10 Years Ago

prf was on the tooling preg, as ive seen the good results you've had. shd said moq of 25sqm but...

scottracing - 10 Years Ago

Glad you guys enjoyed networking. Hopefully it's improved from last years show. Be good to have a...

TCS - 10 Years Ago

Reading This Topic

Login
Remember Me Reset Password Resend Validation Email Login	Facebook Google