Talk Composites - The Forum for Advanced Composites
Back
Login
Register
Login
Register
Home
»
Easy Composites Ltd Technical Support
»
Easy Composites Ltd - General Technical Support
»
solid body guitar coating
solid body guitar coating
Post Reply
Like
5
solid body guitar coating
View
Flat Ascending
Flat Descending
Threaded
Options
Subscribe to topic
Print This Topic
Goto Topics Forum
Author
Message
AxShack
AxShack
posted 9 Years Ago
ANSWER
HOT
Topic Details
Group: Forum Members
Posts: 4,
Visits: 20
Hi folks,
I am trying to recover a Stratocaster that I rubbed back to wood using Coating Resin to get back to a good surface finish before painting.
I am a complete newbie to the use of epoxy resins and now I fear that I have messed it up !!
I mixed up the two parts as instructed on the bottles, and spread it liberally - probably too thickly actually.
that was 2 days ago and now the surface remains slightly sticky, which worries me a lot !
I have a horrible feeling that it isn't going to cure properly, or will it eventually harden up enough for me get in there with some abrasive and prepare it for a final coat?
If not, I guess I will have to scrape it all off and start again...that will the 4th time, having tried the primer/filler, topcoat, clear coat route 3 times and realised that the wood quality is so bad it was never going to cover well.
Incidentally, Fender use epoxy resin as a grain filler so I was hoping to emulate the factory process.
What say you?
Cheers
Dave
Dave the Luthier
Tags
coating resin
curing problems.
guitar
Reply
Like
5
Reply
AxShack
AxShack
posted 9 Years Ago
ANSWER
HOT
Post Details
Group: Forum Members
Posts: 4,
Visits: 20
I think the humidity level was a bit high, but I think my generous application was mostly to blame !
Have now managed to rub it down quite a bit, back to hard and dry surface and applied a second coat.
I think one more coat and it will be ready for paint
D
Dave the Luthier
Reply
Like
5
GO
Merge Selected
Merge into selected topic...
Merge into merge target...
Merge into a specific topic ID...
Open Merge
Threaded View
Threaded View
solid body guitar coating
AxShack
-
9 Years Ago
You might just have a case of "Amine blush" .. EC coating resin often does that, if left to cure in...
Dravis
-
9 Years Ago
great stuff, many thanks for the pointers there...just off to the workshop to see if it is ok D
AxShack
-
9 Years Ago
Also be very careful with your mixing and weighing of the resin. Epoxies are very sensitive to the...
Warren (Staff)
-
9 Years Ago
I think the humidity level was a bit high, but I think my generous application was mostly to blame !...
AxShack
-
9 Years Ago
Hopefully it should come out with a great finish this time!
Warren (Staff)
-
9 Years Ago
Post Reply
Like
5
Similar Topics
Post Quoted Reply
Reading This Topic
Login
Login
Remember Me
Reset Password
Resend Validation Email
Login
Facebook
Google
Explore
Messages
Mentions
Search