+x JohnH - 1/28/2013 10:17:21 AMHi DanielThanks for the interest in my Quad build.If you are thinking of designing your quad in 3D (which is the way forward) I would think of using a 3D printer to make your initial pattern, this could be another useful way for someone to sponsor you in another useful project.This would allow you to make quick patterns that can be modified and printed overnight so that you can see the changes made.I made my pattern out of the the high density polyurethane foam from this website, which I hand-cut from plans that I had already drawn out, the foam is very easy cut and shape and is strong enough not to distort or dent whilst working on it.I then covered the finished pattern in the ultra light 25g woven cloth and epoxy resin, this was rubbed down and filled/primed until a good finish was achieved and then I sprayed a nice gloss colour over this so Separation would be easier.I think I have already put up photo's of these stages, but if you would like more I will see what I have on my hard drive.The Soric reinforcement is really good, but does add a thickness to the finished article, I would try to mould with several layers of cloth/carbon fibre, I have made several domes using Soric for internal reinforcement and believe me these could be used by the military, as they come out so strong.I use Soric all of the time when I am making my carbon fibre sheets, this comes out exceptionally well.I cannot seem to find any completed photo's of the Quad which has been flown very successfully, I am still in the stage of trying to source "H" section silicon rubber to use to seal the top and bottom sections of the quad (which I will have to have specially made).I have had to work away from home since the middle of last year, so this project has had to go on the back burner, but I will try to take some photo's of the finished model and post them.If you need any more info don't hesitate to ask.All the bestJohndanielsaul (25/01/2013)Hi John,Recently I came across your Carbon fibre quad frame which looks absolutely excellent and I am hoping you might be able to give me some tips.I am currently in sixth form at Sutton Grammar school and last year I built myself a crude, but working, quadcopter using the normal method of flat plates and tubes. I plan to make a new version this year and have managed to secure sponsorship from a composites distributor who have provided me with materials to attempt a moulded design similar to your own.I wonder if you have any further photos of your finished Quad at all that I might be able to look at? At the moment, I am looking to 3D model a design on the computer before getting a pattern or mould professionally made. However, after reading your forum thread I am very interested in how you made your initial pattern? I also wonder if you would recommend the Soric reinforcement you have used? I may have to get myself some when nearing that stage!I look forward to hearing back from you.Thank you,Daniel Saul