Vacuum regulator switch


Vacuum regulator switch
View
Options
Author
Message
AHA
AHA
AHA
posted 10 Years Ago HOT
Forum Member (40 reputation)Forum Member (40 reputation)Forum Member (40 reputation)Forum Member (40 reputation)Forum Member (40 reputation)Forum Member (40 reputation)Forum Member (40 reputation)Forum Member (40 reputation)Forum Member (40 reputation)
Group: Forum Members
Posts: 6, Visits: 14
Hi where can I find a regulator switch to put on my vacuum pump ,so when its up to the required pressure it switches off automaticly and switches on when required . 
Reply Like 4
Reply
Matthieu Libeert
Matthieu Libeert
Matthieu Libeert
posted 10 Years Ago HOT
Supreme Being (7.5K reputation)Supreme Being (7.5K reputation)Supreme Being (7.5K reputation)Supreme Being (7.5K reputation)Supreme Being (7.5K reputation)Supreme Being (7.5K reputation)Supreme Being (7.5K reputation)Supreme Being (7.5K reputation)Supreme Being (7.5K reputation)
Group: Forum Members
Posts: 955, Visits: 3.4K
JRT (18/02/2015)
Question... while the vaccum parts are curing on a oven should the pump be working during the all 8h of curing?


If you have a perfect vacuum there should be no need to lkeep it running 

Matthieu Libeert
Founder MAT2 Composites X Sports
website: www.mat2composites.com
Reply Like 5
GO

Merge Selected

Merge into selected topic...



Merge into merge target...



Merge into a specific topic ID...



Submit

Threaded View
Threaded View
Vacuum regulator switch
AHA - 10 Years Ago
     Like so? https://www.easycomposites.co.uk/smc-vacuum-regulator-for-vacuum-bagging
Hanaldo - 10 Years Ago
     That will regulate the vacuum but not turn off the pump. If you turn the pump off without turning...
Brian_s - 10 Years Ago
             [quote][b]Brian_s (14/02/2015)[/b][hr]That will regulate the vacuum but not turn off the pump. If...
JustJDee - 10 Years Ago
     Thank you for the replies . I am after a switch that will turn the pump on and off and keep the...
AHA - 10 Years Ago
     Is there a reason you want to turn the pump off? From an electrical point of view, there would be...
ajb100 - 10 Years Ago
     Hi AHA, I have been looking into creating something like your describing when I get time. It would...
davro - 10 Years Ago
     Oh my bad, misunderstood your post. What you're asking can be done much simpler, just use one of...
Hanaldo - 10 Years Ago
     I am also looking to find a vacuum regulator switch etc to set up with a tank. I feel that running...
Fasta - 10 Years Ago
     Read my post just above...
Hanaldo - 10 Years Ago
     My Vac pump is a small laboratory unit (oil filled) It is built to run continously for as long as...
Dravis - 10 Years Ago
     Ohh sorry, didn't see that cause of the photo! Thanks mate :)
JustJDee - 10 Years Ago
     Question... while the vaccum parts are curing on a oven should the pump be working during the all 8h...
JRT - 10 Years Ago
             [quote][b]JRT (18/02/2015)[/b][hr]Question... while the vaccum parts are curing on a oven should the...
matthieutje65 - 10 Years Ago
     I thought so, thanks for the quick reply.
JRT - 10 Years Ago
             Epoxy resin can be crafted in a vacuum? What curing time for a piece of carbon fiber with epoxy...
Pakito - 10 Years Ago

Similar Topics

Post Quoted Reply
Reading This Topic

Powered by InstantForum 2017-0 Final © 2025
Execution: 0.000. 3 queries. Compression Enabled.
Explore
Messages
Mentions
Search