Just made some wall panels for a shower enclosure (refused to pay £150 a panel plus fitting kit )

I have a 2.1m x 1.2m double glazed unit that I use for infusing flat sheet.

Sprayed down some white gelcoat, once tacked off I layed down one layer of resin rich 450grm CSM. Whilst still wet I placed a 2m x 1m sheet of 9mm MDF (scored the face with a Stanley knife to aid bonding) onto the wet CSM and weighted it down.

Once cured the sheet was demoulded and cut to size. Result one mirror finish wall panel.





Cost : materials £50 plus two hours labour.

Warren

Carbon Copies Ltd

    

I client asked me to create some carbon gifts that he could give to his special customers at Christmas. We settled on a mouse mat for starters.
As raw edges were unacceptable I produced a quick mould to give a nice radius to the edges.
Lay up is 450grm - 2 layers of 2mm Soric - 450 grm giving a 5mm ish total thickness done with infusion
This is just a sample the finished ones will have his company logo on.

Warren

 

Carbon Copies Ltd