How to get nice finish after bagging?

Author	Message
brummelisa	brummelisa posted 13 Years Ago HOT Topic Details
Group: Forum Members Posts: 20, Visits: 144	I wonder how I can get nicest finish after I have vacuum-bagged my CF without any air-bubbles. I don't use a mold, but a plug (I'm building a bike-frame) and the piece will be wrapped totally with six layers. Should I just paint with epoxy and smooth the surface by sanding and do this a couple of times to build up a surface and when that is done start to put on clear-coat? I have read somewhere that you can use micro balloons with epoxy, but is that just to use it as a filler or can I remove the tiny air-bubbles that can occur in the epoxy? Any idea? / Marcus
	Reply Like 4
Reply
mhdghoul	mhdghoul posted 13 Years Ago HOT Post Details
Group: Forum Members Posts: 49, Visits: 113	its a 2k clear coat with an hs hardner mixed 2:1 , it should be used with an air gun best regards mhd alghoul mhdghoul@hotmail.com youtube channel :atmospherejo link is http://www.youtube.com/user/atmospherejo?ob=0&feature=results_main Edited 13 Years Ago by mhdghoul
	Reply Like 4

Merge into selected topic...

Merge into merge target...

Merge into a specific topic ID...

brummelisa - 13 Years Ago

Mr Rooty Tooty - 13 Years Ago

mhdghoul - 13 Years Ago

mhd alghoul what type of clear coat do you use in auto parts? can it be with a air gun using...

kylle - 13 Years Ago

mhdghoul - 13 Years Ago

Rootz - 13 Years Ago

Thx Roots for the 2k cans tip ;)

Joe - 13 Years Ago

Login
Remember Me Reset Password Resend Validation Email Login	Facebook Google