Wrapping plastic (ie Vinyl) as plug surface.

Author	Message
wozza	wozza posted 12 Years Ago HOT Post Details
Group: Forum Members Posts: 688, Visits: 5.4K	LaxFriedrichs (21/12/2013) Thanks Warren, I'll try just that. No problem. Its a method I use quite a lot for pulling moulds from existing parts if I am unsure of the material/surface type. The last thing you want is a "sticker" and a damaged/destroyed original. I use 3M 77, just a light misting is all that's needed to hold the bagging film in place. Let us know how you get on Warren Carbon Copies Ltd
	Reply Like 3
LaxFriedrichs	LaxFriedrichs posted 12 Years Ago HOT Post Details
Group: Forum Members Posts: 58, Visits: 450	Thanks Warren, I'll try just that.
	Reply Like 2
wozza	wozza posted 12 Years Ago HOT Post Details
Group: Forum Members Posts: 688, Visits: 5.4K	If the surface you want to cover is fairly flat you can stick bagging film to it with contact adhesive. You can get it wrinkle free if you are careful. No release agent needed. Warren Carbon Copies Ltd
	Reply Like 3
LaxFriedrichs	LaxFriedrichs posted 12 Years Ago HOT Topic Details
Group: Forum Members Posts: 58, Visits: 450	Hi all, I'm making some very simple surfaces to use as plugs. The problem is that it will take considerable time to get the surface finish up to a high gloss. Could you tell me if plastic wrapping (ie vinyl or similar) the surface would be suitable solution? I will be using Easylease as a release agent, and my moulds will probably have a vinylester gelcoat. Many thanks, Adam
	Reply Like 2