does coupling coat need to set before tooling resin layup?


does coupling coat need to set before tooling resin layup?
View
Options
Author
Message
James66
James66
James66
posted 11 Years Ago HOT
Forum Guru (52 reputation)Forum Guru (52 reputation)Forum Guru (52 reputation)Forum Guru (52 reputation)Forum Guru (52 reputation)Forum Guru (52 reputation)Forum Guru (52 reputation)Forum Guru (52 reputation)Forum Guru (52 reputation)
Group: Forum Members
Posts: 10, Visits: 99
Hi
making a mould + havnt used uni-mould system before,
I know the gel coat has to cure before coupling coat but does the coupling coat need to cure before tooling resin + csm layup?
Cheers for the help
james
Reply Like 3
GO

Merge Selected

Merge into selected topic...



Merge into merge target...



Merge into a specific topic ID...



Submit

Threaded View
Threaded View
does coupling coat need to set before tooling resin layup?
James66 - 11 Years Ago
     After about 2 to 3 hours should be enough time time depending on temperature,the coupling coat does...
Shaneer22 - 11 Years Ago
     Ok cheers for that, thank you
James66 - 11 Years Ago
     Just to check is the coupling coat is taken to tack or fully cured befor the reinforcement is added
ceebmoj - 9 Years Ago
     Fully cured mate.
Hanaldo - 9 Years Ago
             I always make sure its not fully cured lets say (+24h) but laminate on top of it with the tooling...
matthieutje65 - 9 Years Ago
     Yeh spot on Matthieu, probably should have been more clear with my response. I meant fully hardened...
Hanaldo - 9 Years Ago

Similar Topics

Post Quoted Reply
Reading This Topic

Powered by InstantForum 2017-0 Final © 2024
Execution: 0.000. 3 queries. Compression Enabled.
Explore
Messages
Mentions
Search