Wooden Mould

Author	Message
cvasilliou	c cvasilliou posted 6 Years Ago HOT Topic Details
c Group: Forum Members Posts: 16, Visits: 102	Hello, I have a mould made out of wood and i want to create some skins from it. What i did so far: I have dyed the mould with primer(2 layers). And now im thinking to add a layer of painting. Is this necessary? If I leave it with 2 layers of primer will my mould react with my epoxy resin? I am going to do infusion process.
	Reply Like 3
Reply
Fasta	Fasta posted 6 Years Ago HOT Post Details
Group: Forum Members Posts: 468, Visits: 3.5K	+x scottracing - 2/22/2019 8:52:24 PM I've used tygavax tygaflor and tooltec for use on mdf and wooden plugs, it's a self adhesive ptfe tape and works well, but it ain't cheap. As you are aware the wood soaks up anything you put on it, I know people have used wax through to 2k lacquer. The key is to make sure the coating is cured fully and compatible with the resin system you are using You should do your own small sample test of the materials and release agents etc. Fastacraft Facebook page
	Reply Like 3