really struggling to see it

Author	Message
MiggzFSU	MiggzFSU posted 9 Years Ago HOT Topic Details
Group: Forum Members Posts: 7, Visits: 50	Hey guys So for the last 2 weeks iv been searching and looking for fenders that are in carbon to see how other people have done them. As well as looking at this fender for hours and i cant seem to get the angles and how i would go about it. Here is the fender with the mounting points please i really need some clarity on this. Maybe i am over thinking this
	Reply Like 3
Replies
Hanaldo	Hanaldo posted 9 Years Ago HOT Post Details
Group: Forum Members Posts: 2.5K, Visits: 28K	Pretty straight forward mate, main body of the fender is one piece, brackets will need barriers. You can probably make the top bracket and the main fender together, then the bottom bracket and the front and back brackets can be done separately.
	Reply Like 2
MiggzFSU	MiggzFSU posted 9 Years Ago HOT Post Details
Group: Forum Members Posts: 7, Visits: 50	perfect thanks mate would you make the brackets out of cf as well or would you make them out of metal? then next question, how many sheets of cr would one use? Edited 9 Years Ago by MiggzFSU
	Reply Like 2

Merge into selected topic...

Merge into merge target...

Merge into a specific topic ID...

MiggzFSU - 9 Years Ago

Hanaldo - 9 Years Ago

MiggzFSU - 9 Years Ago

Hanaldo - 9 Years Ago

thank you so much i really appreciate the help

MiggzFSU - 9 Years Ago

thanks for the help guys this is how im doing it, dont know if its right but suppose inn see once...

MiggzFSU - 9 Years Ago

ChrisR - 9 Years Ago

Hanaldo - 9 Years Ago

MiggzFSU - 9 Years Ago

Hanaldo - 9 Years Ago

MiggzFSU - 9 Years Ago

Login
Remember Me Reset Password Resend Validation Email Login	Facebook Google