|
Group: Forum Members
Posts: 592,
Visits: 1.9K
|
-- cover the whole sheet with masking tape! Draw up the shape and the holes on the masking tape .. then cut with the jigsaw about 1 mm inside the outline of the holes -- then sand out to the edge.
That way you will have very nicely finished holes with no cracking.
The masking tape will protect the surface of the Carbon .. -- You can cover both sides with masking tape if you use an electric jigsaw .. that way the jigsaw will not scratch or score the mirror-surface (from infusing on the glass-plate.)
"Sapere Aude"... Dare to KNOW!
The written word is the only truly efficient vehicle for transmitting a complex concept from mind to mind...
103% of all people do not understand statistics...
Do not adjust our mind, theres a fault in reality :-)
|