Hi, I'm just working on some structural calcs; does anyone have the material properties for the fibre used in the standard carbon cloth, tensile strength, youngs modulus etc. any info like this would be really appreciated.

Cheers, M

Hi Paul,

            I assume this calculation assumes the TORAY 300 mentioned previously.

I have some additional queries shown below:-

1. What would be the impact of using a stiffer 2x2 TWILL  cloth based upon TENAX UMS 40 or TORAYCA M340J for example ?

2. Can easy composites supply such a clith described in 1

3.  Does your calcutation apply equally to the wet lay up material or PRE-PEG material

4.  What is the difference in properties if the carbon/kevlar 2x2 TWILL material is used?

                                                                                                                                                Cheers,

                                                                                                                                                                  Maggie