Determine which fabric to chose while roll wrapping a 90mm rod

Talk Composites - The Forum for Advanced Composites

Back

Determine which fabric to chose while roll wrapping a 90mm rod

Author	Message
M Hathiyari	M Hathiyari posted 11 Years Ago HOT Topic Details
Group: Forum Members Posts: 4, Visits: 29	Hi i plan on making a Roll Wrapped carbon fiber tube of 90mm ID and 97mm OD.I was planing on using 12k 400gsm plain weave Carbon fiber material for the same but i am concerned that the cloth will not conform well to the mandrel at the time of wrapping.I plan to vacuum bag after wrapping it manually . So will 12k 400gsm plain weave cloth work or do i need to change the weave/cloth? Please help Tags carbonfiber rods tow tube weave Edited 11 Years Ago by M Hathiyari
	Reply Like 6
Reply
mep12rid	mep12rid posted 11 Years Ago HOT Post Details
Group: Forum Members Posts: 2, Visits: 16	Hi VVS Any idea why Vaseline works better than most of the commercially available release agents? Have you tried or know off other release agents? What about high temperature resistant grease? PS: Couldn't stop myself from commenting
	Reply Like 7

Merge into selected topic...

Merge into merge target...

Merge into a specific topic ID...

Threaded View

Determine which fabric to chose while roll wrapping a 90mm rod

M Hathiyari - 11 Years Ago

I do not think you will have much trouble using 400gsm plain weave on a 90 mm mandrel -- keeping the...

Dravis - 11 Years Ago

How long is the tube going to be and is it a parallel tube. first thing I made was 100mm parallel...

VVS - 11 Years Ago

@Dravis Thank you Could you please elaborate on how the ends of the fabric would displace and why...

M Hathiyari - 11 Years Ago

One of the biggest problems you will have is removing the mandrel, one method is using a metal...

ChrisR - 11 Years Ago

I can answer alot of your questions as ive been and tried them. you may have less problems than I...

VVS - 11 Years Ago

Hi VVS Any idea why Vaseline works better than most of the commercially available release agents?...

mep12rid - 11 Years Ago

I think perhaps Vaseline forms a slightly thicker layer on the mandrel, leaving some room for...

Dravis - 11 Years Ago

Unsure why the Vaseline worked when the others didn't, Paul at EC put me on to it. I expected to...

VVS - 11 Years Ago

@VVS With your method of using heatshrink tubing you start off wrapping a relatively cold...

Dravis - 11 Years Ago

You could be right about the expansion although I tried to keep the heat down as much as possible...

VVS - 11 Years Ago

Yeah ... I did some electronics work, using glue lined shrink tube, and we had all kinds of problems...

Dravis - 11 Years Ago

some pictures. shrink tube all fitted...

VVS - 11 Years Ago

Haaah :w00t: ... Thats exactly the same thing I made my first tubes for ... using EC high Temp...

Dravis - 11 Years Ago

I'm probably following the same road you've been down. Restoring an old race bike and foolishly...

VVS - 11 Years Ago

@vvs Does using a un-perforated film cause loss of dimensional accuracy? Also do you know the...

M Hathiyari - 11 Years Ago

It didn't affect my diamentional accuracy as its very thin, perhaps 0.2 mm. its unlike other...

VVS - 11 Years Ago

Reading This Topic

Login
Remember Me Reset Password Resend Validation Email Login	Facebook Google

Determine which fabric to chose while roll wrapping a 90mm rod

Determine which fabric to chose while roll wrapping a 90mm rod

Merge Selected

Threaded View

Similar Topics

Reading This Topic

Login

Explore

Messages

Mentions

Search