Splitter mold

Author	Message
BlackNDecker	BlackNDecker posted 11 Years Ago HOT Topic Details
Group: Forum Members Posts: 92, Visits: 251	Hey guys. Just finished up this mold for a friend. The plan is to make a cf splitter with a divinicel core. I'm thinking the best way is to vacuum infuse it in two separate parts: 1) part 1 would be the visible, cosmetic layer using 3 layers of 2x2 twill. 2) Then I would tear the peel ply off and lay the divinycel down with another 3 layers of 2x2 twill on the underside. 3) then vacuum infuse the second layer with the divinicel sandwiched between. Do you all foresee any problems with this method? Here is the splitter and mold: I added some relief tabs so I could insert a wedge to pry out the spliiter: Gelcoat: Edited 11 Years Ago by BlackNDecker
	Reply Like 3

Merge into selected topic...

Merge into merge target...

Merge into a specific topic ID...

Splitter mold

BlackNDecker - 11 Years Ago

BlackNDecker - 11 Years Ago

Hanaldo - 11 Years Ago

BlackNDecker - 11 Years Ago

Hanaldo - 11 Years Ago

brainfart - 11 Years Ago

BlackNDecker - 11 Years Ago

Hanaldo - 11 Years Ago

fgayford - 11 Years Ago

Login
Remember Me Reset Password Resend Validation Email Login	Facebook Google