Formula Student Wing/spoiler


Formula Student Wing/spoiler
View
Options
Author
Message
Vwodk4
Vwodk4
Vwodk4
posted 11 Years Ago HOT
Forum Member (37 reputation)Forum Member (37 reputation)Forum Member (37 reputation)Forum Member (37 reputation)Forum Member (37 reputation)Forum Member (37 reputation)Forum Member (37 reputation)Forum Member (37 reputation)Forum Member (37 reputation)
Group: Forum Members
Posts: 3, Visits: 6
Hi all,

I am looking for someone who have experience in mold making for a carbon fibre wing. As you see in the picture below.
http://cretiveproductions.files.wordpress.com/2013/09/s1223-2-stage-back-wing.jpg?w=800


I know that you should make 2 negative molds that splits the wing airfoil at the cordline, (splits the wing in 2 sides)
but do you have to make the upper an lower side of the wing in 2 pieces? and after it glue it toghether? or is there a way to just make the wing in one part?
Any advice?

thanks 

 
Reply Like 6
Reply
Vwodk4
Vwodk4
Vwodk4
posted 11 Years Ago HOT
Forum Member (37 reputation)Forum Member (37 reputation)Forum Member (37 reputation)Forum Member (37 reputation)Forum Member (37 reputation)Forum Member (37 reputation)Forum Member (37 reputation)Forum Member (37 reputation)Forum Member (37 reputation)
Group: Forum Members
Posts: 3, Visits: 6
Yea sounds the most easy production method if you only need to make one wing... but would be great if we can make more Smile
Reply Like 6
GO

Merge Selected

Merge into selected topic...



Merge into merge target...



Merge into a specific topic ID...



Submit

Threaded View
Threaded View
Formula Student Wing/spoiler
Vwodk4 - 11 Years Ago
     You can cut foam with a hot wire in the profile of your wing. Lay up some carbon on mylar and then...
FLD - 11 Years Ago
     Yea sounds the most easy production method if you only need to make one wing... but would be great...
Vwodk4 - 11 Years Ago
     If you build a wing for a real race car that produces real down force rather then just for the look...
George Sychrovsky - 11 Years Ago
             [quote][b]George Sychrovsky (21/06/2014)[/b][hr]If you build a wing for a real race car that...
fgayford - 11 Years Ago
             [quote][b]George Sychrovsky (21/06/2014)[/b][hr]If you build a wing for a real race car that...
Vwodk4 - 11 Years Ago
     I am sure Warren from carbon copies will be along soon :) Chris carbon fibre works ltd
carbonfibreworks - 11 Years Ago
     You can put fittings into the foam before you laminate onto it. The foam acts as a support over the...
FLD - 11 Years Ago
     Some places use an interskin part like this:
FLD - 11 Years Ago
     wings are best done with a small tab of cf on the inside of the joint line with adhesive in the butt...
ajb100 - 11 Years Ago
     Hi. I don't want to be negative here but having been involved in several Formula Student projects if...
wozza - 11 Years Ago

Similar Topics

Post Quoted Reply
Reading This Topic

Powered by InstantForum 2017-0 Final © 2025
Execution: 0.000. 2 queries. Compression Enabled.
Explore
Messages
Mentions
Search