By Paul M - 2/27/2016 4:42:26 PM
Hello,making a plug for a motorbike tank from the original tank.
I have sanded it down and used filler primer as there were a few
small dents and scratches,they have all been filled and smoothed,
next I will polish the top half.I have got mould release wax,
semi-permanent release agent and P.V.A.release agent.Which off
these would work best on the filler primer.
Cheers Paul
|
By Chris Scott - 3/2/2016 6:36:32 PM
Anytime I have a plug/pattern made of different compositions (wood, primer, unknown plastics, etc) I just use PVA to be safe. I spray it on and it leaves an amazing finish. Eliminates risk with no set back (in my experience at least).
|
|