Bonding CF Tube to Aluminium

Talk Composites - The Forum for Advanced Composites

Back

Bonding CF Tube to Aluminium

Author	Message
Zorongo	Zorongo posted 11 Years Ago HOT Post Details
Group: Forum Members Posts: 40, Visits: 330	Make an small gap. BUT enough to avoid the Al to eliminate de resin when getting into the carbon tube. I would say someting like 0,1 to 0,2 mm gap. Thick the resin with silica so that it´ll keep in place better than clear resin. Remind surface preparation on both Al and Carbon.
	Reply Like 7
sahil.tfateh	sahil.tfateh posted 11 Years Ago HOT Post Details
Group: Forum Members Posts: 4, Visits: 24	i have taken into consideration the reaction part!! what i am concerned with is the proper bond gap and bond length.
	Reply Like 7
stuart321	stuart321 posted 11 Years Ago HOT Post Details
Group: Forum Members Posts: 37, Visits: 178	If you have access to a lathe then a knurler will put a great surface on the Al insert for adhesion:
	Reply Like 6
combustioncraig	combustioncraig posted 11 Years Ago HOT Post Details
Group: Forum Members Posts: 26, Visits: 46	Like Zorongo said you will have galvanic corrosion if Al and carbon are in direct contact. Then you need to really consider the surface prep of the Al use acetone and thurly scratch the surface to promote bonding. Here is a nice website and you just select the substrates and it gives you the adhesive recommended for the job. The Crestabond® series adhesives is what they are suggesting.
	Reply Like 8
Zorongo	Zorongo posted 11 Years Ago HOT Post Details
Group: Forum Members Posts: 40, Visits: 330	Remind carbon will corrode aluminium if in direct contact. You can avoid it by using a layer of glass between them. Gap between tubes to be as thinner as possible.
	Reply Like 6
sahil.tfateh	sahil.tfateh posted 11 Years Ago HOT Topic Details
Group: Forum Members Posts: 4, Visits: 24	I need to bond Carbon Fiber Tubes to aluminium inserts. What should be the appropriate bond gap b/w CF tube's ID and Al inserts OD??????? Tags carbon fibre
	Reply Like 5