Unimould issues

Author	Message
LaxFriedrichs	LaxFriedrichs posted 12 Years Ago HOT Topic Details
Group: Forum Members Posts: 58, Visits: 450	Today (7th July) was a freak day weather wise with temperatures at 26+ Deg. Celsius - this effected my gelcoats and coupling coat. During the second gelcoat, I found that globules/small pieces were forming in my mixing pot, fortunately these are mostly on the flange area. Even with less catalyst, the coupling coat globuled in the same fashion at a later stage of putting it all down. Regardless, I got the CSM to conform well to the 'pattern area', and most of the globules are also on the flange. So the coatings on the 'pattern area' are 95% OK, however the flange bit is a little bumpy (5mm dia max circular bumps). What's my chances of a decent mold for resin infusion (no post-cure for mould, nor in-mould post-cure for laminated CF)? I will be doing the final tooling resin process when it's slighly cooler tomorrow. Would the process work without any catalyst? Thanks guys!
	Reply Like 3

Merge into selected topic...

Merge into merge target...

Merge into a specific topic ID...

Unimould issues

LaxFriedrichs - 12 Years Ago

wozza - 12 Years Ago

LaxFriedrichs - 12 Years Ago

Second gelcoat, first coat was much smoother...

LaxFriedrichs - 12 Years Ago

wozza - 12 Years Ago

carboncactus - 12 Years Ago

LaxFriedrichs - 12 Years Ago

No worries. I told you the first couple are scrapers :) certainly the first one I made was. The...

carboncactus - 12 Years Ago

Ha Ha !!!!! I am from Todmorden " Where men are men and sheep are scared" Lol

wozza - 12 Years Ago

LaxFriedrichs - 12 Years Ago

wozza - 12 Years Ago

Login
Remember Me Reset Password Resend Validation Email Login	Facebook Google