release film - for small project


release film - for small project
View
Options
Author
Message
loden
l
loden
posted 5 Years Ago HOT
Junior Member (17 reputation)Junior Member (17 reputation)Junior Member (17 reputation)Junior Member (17 reputation)Junior Member (17 reputation)Junior Member (17 reputation)Junior Member (17 reputation)Junior Member (17 reputation)Junior Member (17 reputation)
Group: Forum Members
Posts: 2, Visits: 6
I'm new at working with carbon fiber- using epoxy resin, 
I'd like to know where to get release film- something to cover the patch I'm working on so it's smooth when cured. 

I'm repairing a carbon fiber paddleboard with small dent 1cm diameter. 
Thanks
Reply Like 3
GO

Merge Selected

Merge into selected topic...



Merge into merge target...



Merge into a specific topic ID...



Submit

Threaded View
Threaded View
release film - for small project
loden - 5 Years Ago
     If you just want to make the outer film of epoxy reasonably smooth with the existing surface once you've applied additional resin, then something like packing tape will work okay. You'll likely need....
MarkMK - 5 Years Ago
             Thanks for the info, I didn't realize nor know how to finish the surface. So after carbon + epoxy resin layer, I would sand the patch down, and leave it as is or apply a thin coat of epoxy resin? Th...
loden - 5 Years Ago
                 A lot depends on the level of cosmetic finish that you need for the repair and how your part was originally constructed If it looks like fibreglass matting has been used as reinforcement on the rear...
MarkMK - 5 Years Ago

Similar Topics

Post Quoted Reply
Reading This Topic

Powered by InstantForum 2017-0 Final © 2024
Execution: 0.000. 2 queries. Compression Enabled.
Explore
Messages
Mentions
Search