Hello! Pressure tank or vaccum chamber?

Talk Composites - The Forum for Advanced Composites

Back

Hello! Pressure tank or vaccum chamber?

Author	Message
Fasta	Fasta posted 8 Years Ago HOT Post Details
Group: Forum Members Posts: 468, Visits: 3.5K	+x Ladulas - 10/1/2017 5:38:54 PM +x Fasta - 10/1/2017 11:12:38 AM +x Ladulas - 9/30/2017 7:11:28 PM Hello! Can i use vacuum degassing for removing all bubbles out of Water Clear Polyurethane Casting Resin or do a need to use a Pressure Pot to Cast in ? Is it to fast cure time for Water Clear Polyurethane Casting Resin for using vacuum? I think the vacuum degassing should work ok. I use a water clear polyurethane that has a 15 minute pot life although I do not degas this one. It seems quite thin and should degas within a minute or two in a chamber. Isn't the Water Clear Polyurethane pot-life 5 min? The one I use is 15 minutes. https://bjbenterprises.com/index.php/wc-595-a-b/ Fastacraft Facebook page
	Reply Like 2
Ladulas	Ladulas posted 8 Years Ago HOT Post Details
Group: Forum Members Posts: 2, Visits: 10	+x Fasta - 10/1/2017 11:12:38 AM +x Ladulas - 9/30/2017 7:11:28 PM Hello! Can i use vacuum degassing for removing all bubbles out of Water Clear Polyurethane Casting Resin or do a need to use a Pressure Pot to Cast in ? Is it to fast cure time for Water Clear Polyurethane Casting Resin for using vacuum? I think the vacuum degassing should work ok. I use a water clear polyurethane that has a 15 minute pot life although I do not degas this one. It seems quite thin and should degas within a minute or two in a chamber. Isn't the Water Clear Polyurethane pot-life 5 min?
	Reply Like 2
Fasta	Fasta posted 8 Years Ago HOT Post Details
Group: Forum Members Posts: 468, Visits: 3.5K	+x Ladulas - 9/30/2017 7:11:28 PM Hello! Can i use vacuum degassing for removing all bubbles out of Water Clear Polyurethane Casting Resin or do a need to use a Pressure Pot to Cast in ? Is it to fast cure time for Water Clear Polyurethane Casting Resin for using vacuum? I think the vacuum degassing should work ok. I use a water clear polyurethane that has a 15 minute pot life although I do not degas this one. It seems quite thin and should degas within a minute or two in a chamber. Fastacraft Facebook page
	Reply Like 3
Ladulas	Ladulas posted 8 Years Ago HOT Topic Details
Group: Forum Members Posts: 2, Visits: 10	Hello! Can i use vacuum degassing for removing all bubbles out of Water Clear Polyurethane Casting Resin or do a need to use a Pressure Pot to Cast in ? Is it to fast cure time for Water Clear Polyurethane Casting Resin for using vacuum?
	Reply Like 2