removing pin holes

Talk Composites - The Forum for Advanced Composites

Back

removing pin holes

Author	Message
Toffee	Toffee posted 9 Years Ago HOT Topic Details
Group: Forum Members Posts: 36, Visits: 118	Hi all, I have made a few parts which have a few pin holes, whats the best/easiest method for removing these, do you just mix a bit of resin with fast hardener and keep applying until the hole is filled and then flat off or is there a better method? cheers Lee.
	Reply Like 5

Merge into selected topic...

Merge into merge target...

Merge into a specific topic ID...

Threaded View

removing pin holes

Toffee - 9 Years Ago

That's generally the best method, but it's a lot of work given resin doesn't sand easily....

Hanaldo - 9 Years Ago

:) thanks for the tip.

Toffee - 9 Years Ago

If you plan to lacquer the part just skim it with APF7 Its a black filler like p38 but made for...

f1rob - 9 Years Ago

[quote][b]f1rob (13/05/2015)[/b][hr]If you plan to lacquer the part just skim it with APF7 Its a...

flamypie - 9 Years Ago

I would also like to know where to get this product has anybody here tried this? Wiping filler...

Bonobo - 9 Years Ago

rob is that the name for the infamous 'black magic'?? i couldnt remember the company who makes it,...

scottracing - 9 Years Ago

"black magic" sold by Ami-con among others

f1rob - 9 Years Ago

"black magic" sold by Ami-con among others

f1rob - 9 Years Ago

I know this is a quick fix but you need to find a cure schedule that you can get to work...

morepower - 9 Years Ago

I know from reading earlier posts that you've spent a lot of time getting the cure schedule right to...

MarkMK - 9 Years Ago

[quote][b]MarkMK (15/10/2015)[/b][hr]I know from reading earlier posts that you've spent a lot of...

morepower - 9 Years Ago

now that is some quality looking parts, and exactly what you should be able to achieve with...

scottracing - 9 Years Ago

Here are a few recommendations from various sources as to lay up schedule etc.. all which I pulled...

20_rc51_00 - 9 Years Ago

[quote][b]20_rc51_00 (16/10/2015)[/b][hr]Here are a few recommendations from various sources as to...

morepower - 9 Years Ago

If it's some help try a majorcompany namedPPG paints they have branches in Australia and other parts...

sam - 9 Years Ago

If it's some help try a majorcompany namedPPG paints they have branches in Australia and other parts...

sam - 9 Years Ago

Having had a look at the SHD PDF, it certainly does look like it offers the opportunity for some...

MarkMK - 9 Years Ago

Mark. To be honest ignore the fact you CAN get a 3 hour cure. Too many seem to want to cure hot and...

morepower - 9 Years Ago

Thanks for the comprehensive reply morepower, it certainly seems like it's worth trying out with so...

MarkMK - 9 Years Ago

SHD have a new material they are developing. Its a higher temperature cure but still classed as a...

morepower - 9 Years Ago

We have tested a few OOA carbon fiber prepregs some time ago, and generally OOA prepregs works with...

ArturK - 8 Years Ago

It may not be the most complex shape but it does have compound curves and several changes of...

morepower - 8 Years Ago

Same with EasyPreg. I had some issues making these parts initially, but after working on my cure...

Hanaldo - 8 Years Ago

Hanaldo, I think it is most want to have a material where the guidelines given work 100%, 100% of...

morepower - 8 Years Ago

[quote][b]morepower (21/11/2016)[/b][hr]Hanaldo, I think it is most want to have a material where...

Hanaldo - 8 Years Ago

[quote][b]Hanaldo (22/11/2016)[/b][hr][quote][b]morepower (21/11/2016)[/b][hr]Hanaldo, I think it is...

morepower - 8 Years Ago

Ive been using shd a lot more at work. But the vtc401 in the clave and the press. Hopefully trying...

scottracing - 8 Years Ago

The ones I get caught on are the complex tricky pieces, as the moulds tend to vary a bit in...

Hanaldo - 8 Years Ago

Another thing I worked out was specifically with the PID controller I'm using (an Omega CN7800). For...

Hanaldo - 8 Years Ago

any advise guys to me that want to build autoclave and to start using pre pregs as i think infusion...

TomDesign - 8 Years Ago

Well my advice would be to really think about whether you need an autoclave or not... I think they...

Hanaldo - 8 Years Ago

so Hanaldo like wings door panels or mirrors best pre pregs as infusion i think real pain with...

TomDesign - 8 Years Ago

I only really do smallish things. Anything bigger than say 0.5sqm I will usually infuse, just due to...

Hanaldo - 8 Years Ago

With out of autoclave pre-pregs getting better there is less need for an autoclave for almost all...

morepower - 8 Years Ago

so guys i simply need to make big owen correct? any help what is needed?

TomDesign - 8 Years Ago

[quote][b]TomDesign (05/12/2016)[/b][hr]so guys i simply need to make big owen correct? any help...

morepower - 8 Years Ago

Reading This Topic

Login
Remember Me Reset Password Resend Validation Email Login	Facebook Google