Wax Fillet need help

Talk Composites - The Forum for Advanced Composites

Back

Wax Fillet need help

Author	Message
Alibro	Alibro posted 11 Years Ago HOT Post Details
Group: Forum Members Posts: 44, Visits: 384	You can get wax fillet from our forum sponsors. https://www.easycomposites.co.uk/soft-yellow-filleting-filling-wax Edited 11 Years Ago by Alibro
	Reply Like 3
Edwin	Edwin posted 11 Years Ago HOT Post Details
Group: Forum Members Posts: 8, Visits: 42	oh...i did using colored plasticine, no wonder...i notice my gelcoat always get hot and melt the plasticine..to avoid the melt plastisin i cover with aluminium tape but still the shape run out coz it melt...ok ill try to get white plasticine thx brother i hope i can share the result soon after.
	Reply Like 3
Hanaldo	Hanaldo posted 11 Years Ago HOT Post Details
Group: Forum Members Posts: 2.5K, Visits: 28K	+1, plasticine works fine. Use a marble to get a nice radius. Just be wary of heat, as plasticine melts so you can get pre-release in the corners if your gelcoat gets hot.
	Reply Like 3
The Fibreglass King	The Fibreglass King posted 11 Years Ago HOT Post Details
Group: Forum Members Posts: 69, Visits: 652	Hi mujahidden. I would suggest using white plastacine. Using coloured plastacine may stain the gel! I would recommend newplast this is a good product!, you will always get the fillet sticking to the gel but plastacine is easily removed, with a minimal amount of finishing on the gel surface, Hope this helps?? Kind Regards The Fibreglass King
	Reply Like 3
Edwin	Edwin posted 11 Years Ago HOT Topic Details
Group: Forum Members Posts: 8, Visits: 42	Hi guys, i could not find any kind of wax fillet in my place, i'm so struggle to make a mold as im kindly use oil base modeling clay to replace "couldn't found wax fillet". my modeling clay doesn't work really well, it always stick on the gel coat and the shape i made always run out from the edge. can u guys help me out, is there any kind of option for me, help plss im noob.
	Reply Like 2