Hi Peeps,

Hoping somebody can help. I did have a search to see if this has been asked before but didn't find anything, so here goes.

I've just used a spray gun to put down crystics primer coats and topped off with their gloss coat, which went better than my first attempt.

But I got really bad/deep orange peel and its been a bit of a pig to get out, so much so I've ended up breaking through the gloss coat to the primer coat beneath.

My question is, can I get away with making my mold (its can bonnet) as normal and then just polish the mold in the affected areas and save it like that, or should I just bite the bullet and spray another coat of gloss and polish it again?

Thx in advance,

Rob