i made lots of these with resin epoxy i can post images. and lots of polyster but please dont use polyster and styren gonna melt your sticker paint and they flow on to the other places of carbon.

Hi TomDesign... please seem y post about stickers..

http://www.talkcomposites.com/6070/graphics-logos-stickers-transfers-UNDER-coating-epoxy

thanks

Ben

Thanxs i done all stuff by hands only. with epoxy resin. ye decals look great under resin and clear coat like 3D

I did  these wraps by hand with epoxy resin, then sprayed with Krylon UV clear.  I like your idea with the decal, I'll have to try that!  There's no indication of the carrier film at all?

correct my friend. But i discovered that parts made with epoxy wraps real pain in the ... as you seem finally finished them perfect only wet sanding needed = and what you think? pin holes started to come out and like my friend say best for wraps only polyster resin no bubles no hard things to polish only minus that this resin after sanding and time like month starting to sand down clear coat or maybe need other resin? as all china use Some kind of Resin called-
Crystal Resin surface is great and hard.

and pin holes you not cure not with acetone nothing you have to brush till material then clear coat on top. that is nonsence.

anyone more done wraps with whats resins?

And the 'non-printed' part of the sticker "dissapears" in the resin you put on top?

Matthieu Libeert
Founder MAT2 Composites X Sports
website: www.mat2composites.com

yes sticker

Great work!

Ha Ha you have a deal