Hi guys I've decided that I need to move from Qualatex balloons to a silicone bladder.
I've got Smooth On rebound coming just because there isn't much available in NZ at the moment.
Its a three part mold and I've built fiber glass shells to go in the mold parts to correctly size the bladder.

I will mess around with some trials but I'm was a little bit confused about the right time to do second coats and joins last time I did this.
I was using dragon skin then and it seemed to go from runny to tack free without a good tack period to second coats and a complex join.

One thing I did learn last time is that acetic cure tube silicone sticks like s*** to a blanket with smooth on silicone for fixing seam flaws.
The idea is to make a thin patch with the smooth on silicone and then glue it on with the cheap tube silicone.

Any pointers would be massively appreciated...Chris

And you're not bleeding out too much resin without a perforated film between the peel ply and the breather?