Hi. I am working on the final stage of my first carbon fiber skinning project. I used all XRC products and carbon from easy composites and the process went smoothly. I did do some of the early sanding with a random orbital sander at 240 grit. I then wet sanded by hand using circular motions from 400 up to 3000. At that stage, the product looked really good, but had a dull, matte finish. I don't recall having any noticeable swirl marks at that time, but it is possible they just weren't visible.

Anyways, today I did the polishing. I did all polishing using pads that I also bought on easy composite and attached to my random orbital sander. I started with the NW1 super cutting compound ( black ), then used the TopFinish 2 ( black ), and then finished it off with the EasyGloss.

Below is the final result. As you can see, there are a lot of swirl marks. I'm not really sure how to proceed now. Should I just try a second round of polishing? Should I go all the way back to the sanding stage? Should I give it another coat of resin? Or should I spray it with some automotive clear coat? I have the clear coat and wouldn't mind doing that, but would that fill in the swirl marks? I don't want to spray it and then regret it.

What do you guys with experience recommend?

Thanks!

Here in Europe 2K hardeners with Isocyanate production or import is banned since 2017 and now mostly phased out and unavailable. Try looking for Non-Isocyanate hardeners with acrylic car paint.
I spray once or twice a month too,using a 3M mask with NOISH approved  P100 (60921) filter in a well ventilated room