|
Group: Forum Members
Posts: 3,
Visits: 5
|
Hi all,
I am undertaking an R&D project to reinforce a curved wood surface with Kevlar. It will need a resin surface of some sort that can withstand regular strikes against a metal edge.
The kevlar will be reasonable secure against the surface, but the resin will need to both bond and seal the surface.
The clarity of the finish is not critical and ideally, the surface should be machinable or at least able to be smoothed with sandpaper or varying grit.
In terms of application, I was hoping not to have to cast, but i'm not sure as to what finish can be achieved with a brush.
I can't give too many specifics due to IP, sorry. All ideas greatly appreciated.
Thanks in advance, Ric
|