Part with peeled off paint.Next step?

Talk Composites - The Forum for Advanced Composites

Back

Part with peeled off paint.Next step?

Author	Message
Classicarbon	C Classicarbon posted 5 Years Ago HOT Topic Details
C Group: Forum Members Posts: 86, Visits: 639	I have my bonnet which in some places have paint come off. If I use filler to cover level differences and flash tape on top should ok? I plan tu use it to make a mould from it. And rust spots I know
	Reply Like 4
Replies
Hanaldo	Hanaldo posted 5 Years Ago HOT Post Details
Group: Forum Members Posts: 2.5K, Visits: 28K	Yeh 2k high build primer. I would always then top coat that properly too, I don't like moulding off primer as it's very hit and miss. But your call. Can also spray PVA release agent, quite reliable even on a 1k coating. But will take some refinishing to get the mould up to scratch.
	Reply Like 3
Classicarbon	C Classicarbon posted 5 Years Ago HOT Post Details
C Group: Forum Members Posts: 86, Visits: 639	+x Hanaldo - 1/21/2020 3:20:54 PM Yeh 2k high build primer. I would always then top coat that properly too, I don't like moulding off primer as it's very hit and miss. But your call. Can also spray PVA release agent, quite reliable even on a 1k coating. But will take some refinishing to get the mould up to scratch. I Will struggle to use 2k Primer so might need to stay with flash tape and then smooth out the mould.
	Reply Like 3
Hanaldo	Hanaldo posted 5 Years Ago HOT Post Details
Group: Forum Members Posts: 2.5K, Visits: 28K	+x Classicarbon - 1/21/2020 3:53:21 PM +x Hanaldo - 1/21/2020 3:20:54 PM Yeh 2k high build primer. I would always then top coat that properly too, I don't like moulding off primer as it's very hit and miss. But your call. Can also spray PVA release agent, quite reliable even on a 1k coating. But will take some refinishing to get the mould up to scratch. I Will struggle to use 2k Primer so might need to stay with flash tape and then smooth out the mould. It really is virtually impossible to get rid of flash tape marks without digging a massive low spot in the mould. Much better off using a 1k primer and just spraying PVA release agent as Warren said.
	Reply Like 5
Classicarbon	C Classicarbon posted 5 Years Ago HOT Post Details
C Group: Forum Members Posts: 86, Visits: 639	+x Hanaldo - 1/21/2020 3:20:54 PM Yeh 2k high build primer. I would always then top coat that properly too, I don't like moulding off primer as it's very hit and miss. But your call. Can also spray PVA release agent, quite reliable even on a 1k coating. But will take some refinishing to get the mould up to scratch. Is that gun Will be enough Good for PVA ? And can I apply spray glue on top of it after?
	Reply Like 4