Hi,

I am planning to use PX90 for Snowboard Sidewalls. That is, I will pour the PU resin into channels routed into the wood cores. As PU resins tend to react with moisture contained in the wood core, do you have any recommendations on wood sealers suitable to be used with this product?

secondly, I assume that your product 'Translucent Tinting Pigments for Clear Resin - Pack of 10' is suitable to be used with PX90?
If so, by when do you expect those pigments to be back in stock?

Cheers,
Martin

At the bottom end of the scale, the PU becomes more rigid and brittle below -20C which is the lowest recommended service temperature.


Warren Penalver
Easy Composites / Carbon Mods - Technical Support Assistant

+x

 

Warren (Staff) - 10/5/2018 8:41:31 AM

At the bottom end of the scale, the PU becomes more rigid and brittle below -20C which is the lowest recommended service temperature.

Hi,
the user guide / technical data sheet for XenCast PX series shows a picture of a blue skateboard wheel using translucent tinting pigments. How can you get a blue color like shown in the picture, given that Part A of the PX product  is quite dark/yellow? I tried to get the same color as shown in the picture for snowboard sidewalls, but they turned out greenish...


Thanks,
Martin