Good morning, this may prove a tricky question to answer but who doesn't love a challenge!


First a little background information. As a University we have been making moulds and parts from polyester resin for almost 20 years but now want to try and reduce our carbon footprint, as well as giving our students a safer working environment by switching to a bio based epoxy resin system. We have chosen Super Sap from Entropy. Obviously there is a significant cost increase associated with the epoxy over the polyester but due to many benifits of the Super Sap we are willing to invest heavily in this.

There is however one main issue. The lack of an epoxy gelcoat that is compatible with this system. The only way we can justify switching fully to epoxy is if the process that we currently employ with polyester remains the same.

So my question is has anyone found, and is using, a decent epoxy based gelcoat for hand lay-up? Obviously I'm aware of the many 'Epoxy Compatible Polyester Gelcoat' options but the big selling point of using Super Sap is the very low VOC's meaning no repiratory equipment is needed, so would be a step backwards if we had to use Polyester alongside this.

Having spoken to Entropy, they do not currently make a gelcoat so I've taken it upon myself to research into this and hopefully others will find it useful. Ultimately what we need is a clear epoxy gelcoat that can be pigmented much the same as a polyester can, is polishable and hard waring. Not too much to ask for!

There may well be a good reason why an epoxy gelcoat doesn't seem to exist when there are countless polyester options, but as I'm not a chemist I cannot see why one wouldn't work.

Any help / advice / criticism is greatly recieved.

https://aub.ac.uk/

Epoxy moulds are big in the aerospace industry. I've used the Airtech Infusioncoat, which is excellent. However it is bloody expensive stuff at around AUS$8500 for the 25kg kit.